Table of Contents
EXA64100 & EXA32100A G5+ Series
You can find the current running firmware version of your system like this:
Go to the WebUI → Overview, then scroll down to System Information.
Release V6.0R19
General Information
| Image Version | MD5 | Release Date |
|---|---|---|
| V6.0R19.bin | 8a556351dd1ca301f7491bb61aadd06b | 18.03.2025 |
| V6.0R19.bin.asc | 51dafa646396ead34b7e24eb8dae2c0b |
Bug Fixes
| # | ID | Description |
|---|---|---|
| 1 | TE-B-385 | WebUI: Not possible to delete split ports from Egroups, in certain circumstances |
| 2 | TE-B-396 | Logrotate fails to delete log files, filesystem is overloaded by very large log files |
New Features and Enhancements
- General
- Option to create "Bidirectional" Rules based on IP or UDP/TCP port
- WebUI
- New page for Module Information
- New customization options for all tables (Rules, Ports, …)
- New Warning Info (Last 10 warnings) on Landing Page
- Overall speed and performance improvements
Known Issues
| # | ID | Description |
|---|---|---|
| 1 | TE-B-296 | SNMP walk: EXA32100A shows only 4 fans, instead of 5 |
| 2 | TE-B-364 | VXLAN Termination - Custom UDP is not working to detect VXLAN |
| 3 | TE-F-273 | W/o error pkt permit, packets with wrong mac address are forwarded |
| 4 | TE-B-365 | Mutation in SNMP Warning Frequency menu configuration doesn't work - The trap is always sent even if it's set to "Once" |
| 5 | TE-B-366 | Egress/Ingress Port Above/below Threshold in SNMP Warning Frequency menu configuration doesn't work - The trap is always sent even if it's set to "Once" |
| 6 | TE-B-375 | SNMP > Port Trap Config > "Config Reset" button doesn't work |
| 7 | TE-B-376 | Rule Management > Ingress Rule > Search Rule: "Ingress Port" > FAIL - No option can be selected |
| 8 | TE-B-394 | Egress Filter: Push VLAN is not working |
| 9 | TE-B-395 | Egress Filter: Exported Rules cannot be imported (File corrupted) |
Release V6.0R18P5
General Information
| Image Version | MD5 | Release Date |
|---|---|---|
| V6.0R18P5.bin | 8a556351dd1ca301f7491bb61aadd06b | 29.01.2025 |
| V6.0R18P5.bin.asc | 51dafa646396ead34b7e24eb8dae2c0b |
Bug Fixes
| # | ID | Description |
|---|---|---|
| 1 | TE-B-391 | Bug: Egress Ports may crash due to incorrect buffer allocation for jumbo frames |
| 2 | TE-B-392 | FAN Airflow shows wrong direction on the web-GUI |
Known Issues
| # | ID | Description |
|---|---|---|
| 1 | TE-B-296 | SNMP walk: EXA32100A shows only 4 fans, instead of 5 |
| 2 | TE-B-364 | VXLAN Termination - Custom UDP is not working to detect VXLAN |
| 3 | TE-F-273 | W/o error pkt permit, packets with wrong mac address are forwarded |
| 4 | TE-B-365 | Mutation in SNMP Warning Frequency menu configuration doesn't work - The trap is always sent even if it's set to "Once" |
| 5 | TE-B-366 | Egress/Ingress Port Above/below Threshold in SNMP Warning Frequency menu configuration doesn't work - The trap is always sent even if it's set to "Once" |
| 6 | TE-B-375 | SNMP > Port Trap Config > "Config Reset" button doesn't work |
| 7 | TE-B-376 | Rule Management > Ingress Rule > Search Rule: "Ingress Port" > FAIL - No option can be selected |
| 8 | TE-B-385 | WebUI: Not possible to delete split ports from Egroups, in certain circumstances |
| 9 | TE-B-395 | Egress Filter: Exported Rules cannot be imported (File corrupted) |
| 10 | TE-B-396 | Logrotate fails to delete log files, filesystem is overloaded by very large log files |
Release V6.0R18P4
General Information
| Image Version | MD5 | Release Date |
|---|---|---|
| V6.0R18P4.bin | 30ff6c794599ebc313dac30aa97a2903 | 15.11.2024 |
| V6.0R18P4.bin.asc | b0ab9aa241f2bdc85a2768a6e097d066 |
Bug Fixes
| # | ID | Description |
|---|---|---|
| 1 | TE-B-384 | WebUI: Not possible to change "Ether Type" to VLAN for any rule except rule ID 1 |
| 2 | Optimized password and IP setting modifications via exmenu |
Known Issues
| # | ID | Description |
|---|---|---|
| 1 | TE-B-391 | Bug: Egress Ports may crash due to incorrect buffer allocation for jumbo frames |
| 2 | TE-B-296 | SNMP walk: EXA32100A shows only 4 fans, instead of 5 |
| 3 | TE-B-364 | VXLAN Termination - Custom UDP is not working to detect VXLAN |
| 4 | TE-F-273 | W/o error pkt permit, packets with wrong mac address are forwarded |
| 5 | TE-B-365 | Mutation in SNMP Warning Frequency menu configuration doesn't work - The trap is always sent even if it's set to "Once" |
| 6 | TE-B-366 | Egress/Ingress Port Above/below Threshold in SNMP Warning Frequency menu configuration doesn't work - The trap is always sent even if it's set to "Once" |
| 7 | TE-B-375 | SNMP > Port Trap Config > "Config Reset" button doesn't work |
| 8 | TE-B-376 | Rule Management > Ingress Rule > Search Rule: "Ingress Port" > FAIL - No option can be selected |
| 9 | TE-B-385 | WebUI: Not possible to delete split ports from Egroups, in certain circumstances |
| 10 | TE-B-395 | Egress Filter: Exported Rules cannot be imported (File corrupted) |
| 11 | TE-B-396 | Logrotate fails to delete log files, filesystem is overloaded by very large log files |
Release V6.0R18
General Information
| Image Version | MD5 | Release Date |
|---|---|---|
| V6.0R18.bin | 87dd43443460a7854b6ad158b570ef63 | 09.08.2024 |
| V6.0R18.bin.asc | 05b88b3b3eec960df4fd731c39e9b33c |
Bug Fixes
| # | ID | Description |
|---|---|---|
| 1 | TE-B-372 | Flexible Load-balancing is not "session stable" after port down/up event |
| 2 | TE-B-373 | WebUI does not start after booting due to compatibility issues with certain transceiver modules |
| 3 | TE-B-369 | WebUI does not come up after shutting down a port from a load balancing group and rebooting the unit |
| 4 | TE-F-308 | TACACS+ request should contain the remote IP address of the client who is connecting to the server |
New Features and Enhancements
- General
- Updated Linux OS.
- Supports termination of ERSPAN v1.
- Supports new VLAN based hash modes.
- Decreases booting time.
- Security
- Several packages have been updated.
- Supports authentication with LDAP.
- WebUI
- Supports bytes and bps statistics of each filter.
- Supports incremental import/export of configuration.
- Added a hint when adding new rules and there is a conflict of new and existing rules.
- Renamed interface modes and added "Ingress only".
Known Issues
| # | ID | Description |
|---|---|---|
| 1 | TE-B-296 | SNMP walk: EXA32100A shows only 4 fans, instead of 5 |
| 2 | TE-B-364 | VXLAN Termination - Custom UDP is not working to detect VXLAN |
| 3 | TE-F-273 | W/o error pkt permit, packets with wrong mac address are forwarded |
| 6 | TE-B-365 | Mutation in SNMP Warning Frequency menu configuration doesn't work - The trap is always sent even if it's set to "Once" |
| 7 | TE-B-366 | Egress/Ingress Port Above/below Threshold in SNMP Warning Frequency menu configuration doesn't work - The trap is always sent even if it's set to "Once" |
| 8 | TE-B-375 | SNMP > Port Trap Config > "Config Reset" button doesn't work |
| 9 | TE-B-376 | Rule Management > Ingress Rule > Search Rule: "Ingress Port" > FAIL - No option can be selected |
| 10 | TE-B-384 | WebUI: Not possible to change "Ether Type" to VLAN for any rule except rule ID 1 |
| 11 | TE-B-385 | WebUI: Not possible to delete split ports from Egroups, in certain circumstances |